Mastering the correct operation technology of emulsion equipment can save processing time, get the emulsion that meets the quality requirements, avoid the consumption of quality and physical strength, and effectively reduce the chance of waste products. Next, let's look at the use skills of emulsion equipment together.
Before use, we should check whether the spray gun produces ideal spray shape, whether atomization is uniform, whether the edge is clear or not, and there are few particles of paint and mist outside the spray edge.
The capacity of the air compressor should be consistent with the requirements of the emulsion equipment. In order to insure enough intake volume, the air inlet of the air compressor and the inlet diameter of the inlet of the spray machine should be no less than the inlet pipe diameter specified in the instruction.
When adjusting the equipment pressure, we should follow the principle of "spray shape and pressure pairs", because too high pressure will not improve the coating quality, only shorten the life of the equipment, increase the wear and tear, and make the paint rebound, waste paint and pollution space.
In the use of spraying machine, and pulled the trigger before the gun should be in motion, and keep the constant distance between gun and workpiece, not when the distant past.
The spray gun should be moving uniformly at the time of spraying. When spraying the same work, the starting point of the first spray stroke should be the same, and the surface of the workpiece should be covered by the wet paint, and the overlap of the adjacent spraying stroke should be consistent.